Astm f1292

Referenced Documents (purchase separately) The documents. In this test, G-max and the HIC are used to estimate the risk of injury. However, the measurement procedure is too complicated for application. Find Certified Products. Standard Specification for Impact Attenuation of Surfacing Materials Within the Use Zone of Playground Equipment 1. FOR FALL ACCIDENT INJURY CRITERIA.

Macky KATO Yoshie SHIMODAIRA Takeshi SATOand Hiromi. Manufacturing Location: Manufacturer: Unitary Sample Description: Other: Loose fill Material Sample Description: Environmental Chamber No. Porous Pave XLS was.

These codes provide a uniform means to measure and compare characteristics of surfacing materials to determine whether materials provide a safe surface under and around playground equipment. G-max refers to the maximum acceleration during impact, and is measured directly. HIC, or ‘Head Injury Criteria’ is a calculated severity index.

Performance Criterion. Exceeds ADA accessibility rules. Impervious to spills. Resists stains and soiling. The manufacturer of unitary surfacing materials should provide test data to show a match between the fall height of the equipment to be used and the critical height shock-absorbing characteristics of the surfacing materials.

Maintaining that focus, Section 2. View the most recent version. Certified Surfacing There is nothing more important than the safety of our children, and Midwest Mulch Manufacturing provides two engineered mulch products that accomplish this important task. This document has been replaced.

The purpose of this specification is to establish minimum impact attenuation requirements for playground surfaces in order to reduce the risk of severe head injury from falls. Complete and background information can be found in the subsequent sections of this report. Play is an integral part of child development both mentally and physically.

The acceleration of the missile during the impact is measured using an accelerometer and associated data recording equipment. The standard contains information regarding minimum levels of safety performance as well as methods of testing potential surfacing materials both in a laboratory setting as well as at the playground after installation. The report shall be descriptive enough to assist the user of the report in determining compliance with contracts and Standards. ASTM STANDARD UNS NO.

The tiles are offered in a x size, making them able to effectively cover any sized surface. These tiles are ideal for schools, parks, daycares, multi-family playgrounds, back yard play areas and can even be used with indoor or outdoor climbing walls. Your playground will be installed with the proper safety surfacing, which is the largest cause of major playground injuries.

TÜV SÜD America Inc. No black rubber crumb Requires only minimal high-performance infill for ballast significantly reducing maintenance. For instance, loose fill surfaces evaluated by NPPS in the field demonstrate exceptional compliance at fall heights below feet, with a marked decrease in compliance above foot fall heights.

Fall Pad Has Media. Once they are develope manufacturers are required to adhere to these standards and have their products tested by an independent lab to create documented evidence of compliance. At inches of compacted depth the Jelly Bean Rubber Mulch exceeds the test parameters which are 17ft. Certain state regulations may require licensed childcare facilities to have a certain depth.

To learn more about our certification visit the IPEMA website at ipema. After further refining our chips are loaded on trucks and delivered to Vermont, New Hampshire, Massachusetts and Maine.