Diy faux wood beams

If you were installing faux wood beams on straight walls, your job will be much easier. The same idea will still hol even if you want to install these faux beams on the ceiling. You will still create the box and the blocks you screw to will be on the ceiling or at the top of the wall.

A faux wood beam can be a lovely accent to a cottage or cabin ceiling - ours is a bunkie. We used our reclaimed wood -look stain to finish the project for pennies. In this case I am building a Mantel for above my wood stove. Tools and supplies used are linked below. How to make your own faux wood beams?

How do you make Faux wood beams? Wood beams were on the wish list for Jenna of Jenna Sue Design Co. She was surprised to find even faux wood would cost her a pretty penny.

Instea she built the decorative beams she desired out of inexpensive whitewood. I chose three beams for the layout to cover the seams where the wood planks met—two were identical and 20′ long, and one was 10′ long because it ended at a shorter wall. The total ended up at around $2including our stain and a box of screws.

The first step was to run the top 1×4″ along the ceiling, screwed into a stud every couple feet. DIY Faux Ceiling Beams. Cast in one-piece from natural wood forms to precisely replicate the surface texture and grain detail, our cost effective Molded Series of Faux Wood Ceiling Beams are made from premium High Density Urethane (HDU) foam so they’re lightweight, easy and inexpensive to install, maintenance free, and can be used for interior or exterior applications.

Line your ceiling with beams to instantly add character and farmhouse style. Follow these instructions from Jenna Diermann of Jenna Sue Design Co. Free 2-day Shipping On Millions of Items.

With the wood beams fully assemble you will need to fill all nail holes with stainable wood filler (Image 1), and do some light sanding with a fine-grit sandpaper (Image 2). Once the boards are fully preppe be sure to thoroughly wipe the wood clean of any sawdust or debris. A dry cloth will work, but for best use a tack cloth.

So recently, I painted it to look like wood. I used two shades of paint - SW Deer Valley and SW Chateau Brown - and using a brush, blended them together in uneven stripes. When that had drie I lightly covered. Instead of using the real thing, you can create faux beams out of foam insulation sheets.

There were a few reasons for making ceiling beams. Despite having just told you this, we wanted a way to draw attention away from its imperfections, and ceiling beams do just that. We have a weir lumpy low ceiling in the basement.

Another note about Alder wood - it comes in 10ft lengths max. For this reason, we had to do mitered joints to create beams long enough to span the length of the room. Read this tutorial if you are planning to build box beams and install them on a flat ceiling.

Thanks to Cinnamon’s hard work and these chic basement support beams , the are absolutely stunning. Before you waste any time beating up wood that you won’t even use, be sure to cut your boards to the proper length. We ended up using 2×pine boards, and we simply measured the full length of our kitchen to determine how many beams I wanted and how far apart they would be. Build faux wood beams.

Colby cut one side of two the boards at a 45° angle. The middle board needed two 45° angle cuts on each of the long sides. Then, he lined each angled side up to make a U-shape three-side faux beam from wood.