Sanding stair treads

Use LumberLiquidators. Finish Your Flooring Project. Get the Molding You Want Today! What type of Sander for hardwood stairs? The idea behind sanding is to get the treads as smooth as possible.

How do you finish stairs? For initial sanding you will want to use low grit sandpaper such as Y. Sand treads in the direction of the grain, making sure to sand over the entire surface of the tread. I would recommend sanding the tread in horizontal sections that cover the entire length of the tread.

Sand each stair tread to remove the existing stain from the wood. Did you ever wander if there was an easier way to sand treads ? But not with-out this combination. Learn how to strip and sand your wood floors.

Check out the video series on Refinishing Wood Stairs. Attach a medium-grade sanding disc to a power sander, plug it in, and turn it on. Go over the entire surface of each tread to start smoothing out the roughness of the wood. Preparation of new stair treads is exacting.

Factory-sanded treads need further sanding , and using belt or orbital sanders on these relatively small areas can present problems of removing too much. Offering you a square or rectangular sanding pad that perfectly fits most stairs coupled with a compact and easy to maneuver body, sheet sanders are the most popular option for this type of work – you can’t go wrong with these. Then hand-sand , going with the grain, using 120-grit sandpaper.

This is particularly critical with difficult woods to stain , like hard maple. Transform Your Space. Free 2-day Shipping On Millions of Items. Designed to Last, Styles For Any Budget.

Over Wood Species Available! Start by sanding down the treads to bare wood with the grit sandpaper. This will require a combination of. Vacuum between passes, then wipe down the treads with a tack cloth. This step will ensure that dust and.

Start by placing drop cloths over the furniture and nearby structures to protect them from sanding dust,. Vacuum all sanded surfaces, making sure to remove all dust and debris. By Robert Korpella Hardwood stairs are in need of refinishing after a few years of wear. Drum and pad sanders used on flooring are too large and bulky for stair treads.

You do have a few choices in. Sanding disks, pads and sponge sanders all come in various grits, suitable for different sanding stages. Switch to 120-grit for the final pre-stain sanding. In order to get that professional look, your tread needs to be smooth as glass. Using a hand sander with 1grit helped remove any fine scratches, uneven surfaces and finger prints from previous handling.

Of course, you always want to make sure you sand with the grains and not against. Although all of our treads have undergone automated sanding it is essential that you fine-sand the. Sand the surface with 120-grit sandpaper, and thoroughly wipe all residue from the treads. Repeat the process again for a final coat of polyurethane. Do not sand the final coat.

Allow the polyurethane to dry thoroughly before you allow any foot traffic on the treads. We started with store-bought stair treads , that are pre-sanded. We’ve got trust issues, so we went ahead and sanded each tread anyway, with fine sandpaper, and then removed all sanding dust with a vacuum with a soft bristled brush attachment. Wood treads and risers are typically installed by a stair specialist, not the company installing the flooring, although some high-end wood flooring contractors also handle stairs.

There are many reasons for this, including the need for a trained carpenter who is familiar with the subtle nuances that come with the different species and angular. Basic labor to refinish stairs with favorable site conditions. Remove finish layer by sanding.

Includes planning, equipment and material acquisition, area preparation and protection, setup and cleanup. Apply coats polyurethane finish. Try Drive Up, Pick Up, or Same Day Delivery.